The MagnetoSpeed V3 ballistic chronograph kit was designed to be used on barrels and suppressors from 1/2 inch all the way up to 2 inches in diameter. In addition to the larger diameter tolerance, the V3 also has one inch more clearance in the blast zone to account for longer (up to 3" in most cases) muzzle brakes, flash hiders, etc.
MagnetoSpeed V3 features an improved design with the following features:
Improved Display
Three-button menu system
Battery options are; (1) 9-Volt or (2) CR123s
Easy access battery compartment, no need for a screwdriver to swap batteries
Improved shooting modes, with the ability to now operate with air guns
Downloadable firmware updates
Advanced data logging and troubleshooting capabilities
More compact and rugged display housing
Rapid mode with rate-of-fire
Redesigned Bayonet
Rugged strapping system; with metal buckle and triad thumb nut
Proven technology with updated sensor design
New profile and color scheme
New bracket to allow for future alternative attachment options
Dual data connection points
Kit includes:
Display Unit
Retractable connection cable
Standard 6ft connection cable
Stainless steel blast shield
Thick and thin rubber V-block spacers
microSD card with adapter
Bayonet sensor
Polymer spacer kit with screw hardware and Allen wrench
Heavy duty strap with thumb nut tightener
Hard case with custom cut foam
Alignment rod
Instructions
Note: DO NOT MOUNT BAYONET ON ANY SUPPRESSOR COVERS. THE BAYONET MUST BE MOUNTED DIRECTLY ON TO THE SUPPRESSOR TO ENSURE PARALLEL MOUNTING AND PREVENT POSSIBLE BULLET STRIKES.
What is the difference between the V3 and Sporter Models?
The main difference is that the Sporter can fit on barrels from .5" to 1" in diameter. The V3 can fit on barrels and suppressors from .5" to 2" in diameter. Use this comparison chart to see major and minor differences.
For use with V3 displays, you must first update firmware to version V.3.0.03